Secondly a 11spd Crankset will work with your 9spd set-up, but you will need to run a 10spd chain which will work on the 11spd Crank and 9spd Cassette.
Will a 11 speed crankset work with 9 speed?
A 11 speed chain should work okay on 9 speed chainrings.
Can I use a 10 speed crank on a 9 speed bike?
A nine speed crank set will work with a 10 speed drive train. However it's not all plain sailing. You can have trouble using a 10 speed FD with a 9 speed crank set. It doesn't shift as far out as the 9 speed so you may experience sloppy changes to the outer ring and chain rub against the FD in some gears.
Can I use a 12 speed crankset with 9 speed cassette?
Using an 11 or 12 speed chain on a 9 speed cassette will present problems with smooth shifting and the big danger would be risk of severe chain jam should the thinner profile chain of 11 or 12 speeds get stuck between cogs of a 9 speed cassette which are spaced wider than an 11 or 12 speed cassette's cogs.
Can you put an 11 speed cassette on a 9 speed bike?
An 11-speed cassette will fit on a 9-speed hub only when the hub is wide enough. Luckily, 8,9,10 and 11-speed mountain bike hubs have the same spacing, and one can therefore use an 11-speed cassette on all of them.
37 related questions foundCan you upgrade a 9 speed to a 10 speed?
The most you should need to do to allow a 10 speed cassette to work on most 9 speed hubs is install a spacer behind the cassette to make sure the cassette seats tightly. This same compatibility holds true for the new 2005 Ultegra 10 speed components.
Can I put a 10 speed cassette on a 9 speed hub?
This spacer fits between the cassette and freehub body and makes it possible to fit a 10-speed cassette to a 9-speed hub.
Can you use 10 speed crankset with 9 speed cassette?
The 10 speed chain rings will be fine with a 9 speed chain running on them. The problem you will have is the spacing between the chain rings. The 10 speed rings sit closer together than they do on the 9 speed.
Can I use an 11 speed crank on a 10 speed bike?
Registered. An 11-speed crank will perform equally well on a 10-speed system. No one has shown that there is any difference in ring spacing. The chains have the same internal width, so don't know the difference.
How do I know if my crankset is compatible?
In most cases three-and two-piece cranksets are compatible with the same bottom brackets so long as the axle is the same diameter. They are commonly used in conjunction with the mid-style bottom bracket standard. One-piece: This is where the axle and crank arms are a single piece of steel.
Can a 10 speed chain be used on a 9 speed?
Condensed answer: In most cases, a 10-speed chain will operate just fine with a 9-speed cassette because it's slim enough to move up and down the rear cogs without rubbing or skipping.
Can I use a 10 speed crankset with a 8 speed cassette?
First, to answer the question asked: you can use them physically, but the shifting performance will suffer. Second, there is no limitation on the wheel, for a campy 8 speed hub. Put a 10 speed campy group on the bike. 8/9/10 speed are all the same, unless you truly have a freewheel, as opposed to a cassette.
Will a 9 speed crankset work with 8 speed?
Yes, there are no complications with running a 9 speed crankset on an 8 speed drivetrain.
Can you use 11 speed crankset with 10 speed derailleur?
Can I use an 11-speed crankset with an 11-speed chain on my 10-speed drivetrain?” For the official answer we went to both Shimano and SRAM, and not surprisingly, both said that this wouldn't work. Providing essentially identical responses, SRAM replied,”Mixing 10 and 11 speed parts is not recommended.
Can I use 12 speed crankset with 10 speed cassette?
Would not recommend trying to use 12 speed chains on a 10 speed cassette, the narrower profile doesnt give the smoothest shifting.
Is Shimano 11 speed compatibility?
Shimano's mechanical 10- and 11-speed road shifters are not compatible with its 10- and 11-speed MTB derailleurs.
Will a 12 speed cassette fit a 9 speed hub?
It is a wide ratio cassette that has an alloy spider, lockring, and spacer. It will fit any Shimano or SRAM 8, 9, or 10-speed freehub body, and Shimano Dynasys 11-speed mountain freehub bodies.
Which is better 9 speed or 10 speed?
Depending on what manufacturer you go for, 10 speed is usally only one more speed than a 9 speed, and not even so because your gear ratio don't change much. Ten speeds are harder to deal with in setting up because they tend to be more finicky.
Are 9 and 10 speed cassettes the same width?
they are the same width. The distance between the 9 speed gears is ever so slightly wider than on a 10 speed cassette (hence why 10 speed chains need thinner side plates than 9 speed ones.
Are Shimano 9 speed and 10 speed cassettes interchangeable?
Shimano 8- 9- and 10-speed cassettes/hubs are fully interchangeable for wheels with steel Freehub bodies. The only parts that are different in any important way between the 8- 9- and 10-speed systems are the shift control levers.
Can I put a bigger cassette on my bike?
Yes, almost any bike is compatible with bigger cassettes, bike drivetrain is groupset of components that works in perfect harmony, any miss reconfiguring can break the perfect functionality of the system, parts that need to be changed and reconfigured when putting bigger cassette which is long-chain, wide cage ...
Can I upgrade my bike to 10 speed?
Yes, in most cases this upgrade is possible, without the need for replacing the rear-wheel hub body, you only need to change the chain, shifter and readjust your rear-derailleur, when upgrading to a super big ratio cassette, you may need to change the rear-derailleur completely to a new one with a wider cage in order ...
Are 8 speed and 9 speed chains the same?
7, 8, and 9 speed chains have the same inner width, but 9 speed chains have thinner outer plates for a thinner overall chain. So while a 9 speed chain works fine on a 7 or 8 speed drivetrain, it will be a weaker chain that tends to "stretch" faster.
Are 8 and 9 speed chainrings interchangeable?
Yes; as long as you get a 7/8/9 speed compatible chainring set.
Will an 8 speed chain work on a 9 speed bike?
9sp gears have less space between them, so an 8sp chain would rub or jump, which is noisy and/or dangerous. Conversely, a slightly thinner 9sp chain will fit on the wider spaced sprockets of an 8sp bike and not rub. It is only slightly thinner, so it won't cause trouble.
