You can't join two links together, and you will have to remove an outer link to put one in another position. For the price of the two links you probably could have bought a chain, which you will need to do anyway.
Can I use 2 chain links?
Short of using 2 master links and a link or so of the cut off chain the only correct thing to do is to buy another chain. Unless you plan on selling the bike in the near future and not to someone you know.
Can you use two quick links?
It is not safe to join a 9 or 10sp chain with anything other than a quick link or a joining pin. The original pins are riveted over and this breaks off on removal. Nothing wrong with using 2 quick links.
How many times can you use KMC Missing Link?
HOW MANY TIMES CAN THE MISSING LINK BE USED? The Missing Link on chain models X11SL and X11L can not be reused. All other Missing Links can be reused between 2-3 times per life cycle of the chain. If you purchase a replacement chain, the used Missing Link should not be reused and is not interchangeable.
Is it OK to have 2 master links on a chain?
More than one master link should be fine. The only issue I can see with this practice is having a few links of unworn chain inserted into a worn one which might cause problems - not a problem in your specific case as the chain is almost brand new.
17 related questions foundHow are chain links counted?
Count each outside link, which is easily identifiable by the large plates on either side of the link. Continue counting until you reach the beginning. Multiply the count by two to include the inner links. As an example, if you counted 55 outer links, you will know there are 110 total links.
Can you add links back into a bike chain?
Yes, you can add links to a bike chain , but you need to be careful that you have the right tools ( Chain Tool/Master Link Pliers) and correct methods. To check if your chain is undersized, shift onto the largest chainring and the largest cog.
Can KMC quick links be reused?
A little-known fact is that KMC offers both reusable and non-reusable quick links for 10 and 11-speed chains.
Can a KMC Missing Link be used on a Shimano chain?
Yes. I've used SRAM and KMC missing links on 9- and 10-speed Shimano chains for years.
Can you reuse quick link chain?
Sure you can reuse the single use ones.
Can you reuse master link?
Reusing master links is fine.
How do you take off a bike chain without a master link?
If you have a standard chain with no master link: Seat the chain in the chain tool, with the pin of the chain tool aligned with a pin in the chain. Turn the handle of the chain tool until you push the pin out far enough that you can break the chain.
Do all bicycle chains have a master link?
Not all bikes have these links. They are most likely to be found on BMX bikes, single speed bikes or three-speed town bikes with internal gears. The more sprockets a bicycle has on its rear cassette, the narrower the chain must be and therefore the less room there is for this extra-wide master link.
Can you put 2 master links on a dirt bike chain?
The masterlink is already possibly the weakest point in the chain, adding two is not a good idea. That said, new chains are expensive. If you add a second, try to make it a rivet type masterlink. Those are stronger than the clip type and less likely to cause problems.
Can you use two master links on a dirt bike chain?
Statistically, yes, two clips are more likely to have problems than one but if they are properly installed and new clips are used, it shouldn't be a problem. I shoudl also emphasize the importance of using masterlinks/clips that are of the same brand/chain model as the chain itself, as well as any extra links you add.
Can I use 2 missing link on Shimano chain?
You can't join two links together, and you will have to remove an outer link to put one in another position.
Can you use a master link on a Shimano chain?
Shimano chains don't use a master link. You break the chain with a chain tool and then reattach with a Shimano replacement pin.
Can a quick link be used on Shimano chain?
It is compatible with all Shimano 11-speed chains, and officially, it is not reusable. If you're already carrying around a multitool that includes a chain-splitter then sticking a spare quick-link in your saddle bag is a bit of a no brainer.
How many times can a quick link be used?
Sram's 9 speed Power Link was designed to be reused. Sram's 10 speed and 11 speed Master LOCKS are one time use only. KMC and Shimano's master link is also one time use only for 11 speed chains.
How many times can you use a chain Quick Link?
Shimano says their quick links are single use only. I've opened and reused one of mine twice. I also carry an old one for emergencies. But given people waxing chains and whatnot, what's the most number of times you would open and close and reuse a quick link?
How do you put a link back in a chain?
Try to flex the chain at that link - if it feels stiff, push the pin the other way a little bit and try again. Repeat pushing that same pin back and forth in very small increments with the chain break tool, and keep flexing the chain until it is no longer stiff.
How many links should a bike chain have?
Bicycle drive chain length
A new bicycle chain usually comes with 116 links. This is long enough for the biggest chainrings and for most distances of rear wheel from front chainrings. So for optimal length a new chain is usually shortened from the 116 links that come in the box.
How many links make a chain?
The chain is a unit of length equal to 66 feet (22 yards). It is subdivided into 100 links or 4 rods.
