Is SharkBite PEX A or B?

SharkBite non oxygen barrier pipe is manufacture as PEX-B and SharkBite oxygen barrier pipe is manufactured as PEX-C.

Does SharkBite work on PEX A and B?

SharkBite push-to-connect fittings listed to ASSE 1061 approved for PEX-A, PEX-B and PEX-C pipe.

Is SharkBite PEX Type A or Type B?

SharkBite does make a coupling that connects PEX-A to PEX-B. However, we don't recommend using them.

Does SharkBite work on PEX A?

SharkBite push-to-connect fittings are compatible with a variety of pipe types including PEX, copper, CPVC, PE-RT and SDR-9 HDPE.

How do I know if I have PEX A or PEX B?

Again, the main distinction lies in the manufacturing method, which is what assigns an A, B or C to PEX. PEX A is made using the Peroxide, or Engel, method. PEX B is formed using Silane, or Moisture Cure, method. This is the most common PEX pipe type out there.

Is Viega PEX type A or B?

The Viega PEX system uses the PEX-b tubing (although you could also use another brands PEX-a) and a pressed ring securing the PEX to the fittings. Some advantages with the pressing system is that the fitting are now available with press rings already built-in.

Is ProPEX and PEX A the same thing?

PEX pipe is made by a handful of companies, but the best version I've discovered so far is part of a system called ProPEX. It's a proprietary brand of PEX connections and pipe invented by an international company named Uponor (uponor.ca) and based in Finland.

What type of PEX is Uponor?

Uponor manufactures PEX-a tubing is considered the superior type of PEX in the industry because the crosslinking is done during the manufacturing process when polyethylene is in its amorphic state (above the crystalline melting point).

Is Uponor and PEX the same?

Uponor (formerly Wirsbo) has been making PEX pipe for radiant floor heating since 1970, longer than any other PEX manufacturer.

Can you use sharkbite on Uponor PEX?

If your supplier is selling Sharkbite fittings, all sharkbite fittings will work on all three types of Pex. I have only seen Apollo expansion fittings and all Pex expansion fittings will only work with Pex-A due to the I.D. If you have Uponor, you have Pex-A tubing.

Can you use Uponor pipe with Viega fittings?

They work with all Viega PEX tubing (including FostaPEX), as well as all other brands and types (A, B, C). Watts and Uponor press fittings are designed for use only with PEX-AL-PEX tubing (any brand).