Pedaling: When a driver lifts off the throttle, then gets back on it again, in an attempt to regain traction with the rear tires. Pre-staged: When a driver is approximately seven inches behind the starting line and the small yellow light atop his or her side of the Christmas Tree is illuminated.
What does n't mean in drag racing?
No Time or N/T means, as in grudge racing, no times are given out by the announcers or displayed on the scoreboards. The time slips are cut in half, as well as the winning margin being cut away.
What does it mean to knock the tires off?
Knock the tires off/blow the tires off - Spinning the tires during the pass. Tree'd [someone]/Treeing [someone] - Getting off the starting line first without jumping. Rotating the Earth - Making a fast pass. Jump - Leaving before the flashlight is turned on (false start), usually resulting in an instant loss.
What is a burndown in drag racing?
Burn down: When both cars intentionally hesitate before moving out of “pre-stage” and into the "stage" position at the Christmas tree, therefore delaying the start of the race.
What does treed mean in racing?
Getting treed is when you have a significantly worse reaction time than the guy you are racing against. If you're in the starting area and you see the green light and before you even start to move the guy next to you is already out of the gate having totally blown your doors off, well, then you just got treed.
29 related questions foundWhat is a door car in racing?
Drag racing vehicles and vehicle class which usually refers to sedan bodies. Door cars/door slammers still have functional doors for drivers to use. These are sometimes called door slammers, and are differentiated from funny cars which have a lightweight, single piece body that rests on a chassis. $49,000.
What does OG mean in racing?
To fans surprise, the term OG in street racing is the same as the original meaning. They use the phrase, Original Gangster, when talking about their peers and sometimes their cars. Initially, the phrase means 'we are first' – which is what the racers want to be.
Why do drag racers bump in?
Bumping is when the transmission releases all the pressure on the reverse gear for a specified amount of time, allowing the car to "bump" forward. "Creep" is allowing the transmission to release some of the pressure for the duration of the time the driver holds the Secondary button.
How far is the tree from the starting line in drag racing?
When the front tires of a vehicle break the first light beam, the pre-stage beam, the pre-stage lights on the Tree indicate that the racer is about 7 inches from the starting line.
What is a doorslammer car?
Definition. A door-slammer is an automobile type of door, usually hinged but often connected to the opening for entry and exit of a vehicle, such as tracks. You may open or shut a door for the car to enter the doorway. These doors can be either electronically or manually unlocked.
What does red light mean in drag racing?
Foul Start
Also known as a red-light. When a vehicle leaves the starting line before the green light, indicated by the red light on the Tree. When a foul start occurs in eliminations, the racer is eliminated from further competition at the event (unless his or her opponent commits a worse infraction).
What does Heads Up mean in drag racing?
Lingo: Heads-up. Definition: Drag racing where both cars leave the starting line at the same time. No dial-in, no handicap. It's winner take all.
What does hit mean in street racing?
To get the "go", jump, break, hit, kick, or move is to start the race without the flagger. This is another system of handicapping that requires one car to wait until they see the other car start to move before they are allowed to leave their starting line.
What does out mean in Nascar?
Car Condition Terms:
They can be used as an overall description (e.g., “The car is loose everywhere,”) or in conjunction with one another (e.g., “The car is loose in and tight off). 'In' represents how the car is handling going into a turn and 'Out' represents how the car handles coming out of a turn.
How high are finish line beams?
Height of beam approximately 1 9/16” adjusted as necessary (and possible) to provide 11½ to 12-inches of roll using standard dragster wheel/tire (22-inch diameter). Beam height must be low enough to accommodate 3-inch clearance rule as per NHRA Rulebook.
What does it mean to double Bulbing in drag racing?
The opposite of courtesy staging is generally called double bulbing. Which is when a racer turns on the first and second stage bulb before their opponent turns on their first bulb. Sometimes this is just inexperience. Sometimes it's gamesmanship on the part of the racer.
What is the name of the starting equipment that starts a drag race?
These contests are started by means of an electronic device commonly called a “Tree”. Upon leaving the starting line, each contestant activates a timer which is, in turn, stopped when the same vehicle reaches the finish line.
What is a Davis box?
Don't roll through the beams anymore or be forced to stage too deep. With Davis technologies Bump Box you can precisely stage your car in small increments giving you consistency at the tree. The Bump box does not replace your transbrake but works with it allowing you more control at staging.
What is the scramble button in drag racing?
scramble boost is an overboost feature normally activated with a switch. Say for example you normally run 10psi, you can have a little switch that knocks it up to 15psi for a given amount of time.
Why do turbo cars have to bump in?
In essence, the Bump Box temporarily overrides the transbrake. The Bump Box is adjustable, using a pair of knobs (both a “fine” and “coarse” adjustment) on the face of the device to make minute changes in how far the car rolls forward and at what rate it does it.
What does 1320 mean in drag racing?
The 1320 part of its name comes from the distance in feet in a quarter mile. Don't let its normal Challenger looks fool you: This Scat Pack 1320 is the fastest naturally aspirated showroom stock drag car you can buy. Dodge.
Why do drag racers use ice?
The ice cools it, making it denser. Denser fuel puts more fuel to the carb. When I drag raced a looong time ago, we would use dry ice and alcohol to make it colder than plain ice.
What motor is Murder Nova?
The engine itself is pretty basic, considering it makes about 3,400 hp. It's a 572 built with a Lunati crank, Oliver connecting rods, Diamond pistons, and 380cc Dart Pro 2 cylinder heads. At the heart of the engine is a Comp solid roller cam, and Comp lifters and pushrods. The camshaft is geardriven off the crank.
What is a flying lap?
Essentially, a flying lap in F1 is a lap, usually in qualifying where the driver aims to post the fastest time they can. It can only be set after the driver has completed an out lap from the pits.
Who invented the drag race?
One could even argue that drag racing was born in Goltry, Okla., in 1913, with the birth of Wally Parks, who nearly four decades later would found drag racing's most successful and influential sanctioning body. Parks' family moved to California in the early 1920s, and Parks had an early interest in cars.
