What is considered a short chainstay?

For 26" and 27.5" full suspension bikes, something between 420mm and 430mm would be considered short, while for a 29er, something in the mid 430's would be considered short. And then for hardtails, stays can be as short at 400mm for smaller wheels.

What is a good length for a chainstay?

Normal chainstays are: Road bikes: 40.5 to 41.5cm… less than 16 ½ inches. Touring bikes: 42 to 43.5cm…

What is chain stay length?

What is chainstay length? The distance from the center of the bottom bracket to the center of the rear wheel axle. This measurement is taken from the side view of the bike, ignoring the z-axis such that the width of the axle or bottom bracket does not come into play.

How is chainstay length measured?

The chainstay length is the straight line distance between the centre of the bottom bracket axle and the centre of the rear dropout, so it's fairly easy to measure with a ruler.

What is a dropped chainstay?

Dropped Chainstay

This is a driveside only modification, so the pair of stays is asymmetric. The “dropped” stay in this pair curves downward as it approached the bottom bracket shell and back up again to join the frame.

17 related questions found

How does chainstay length affect ride?

A bike's chainstay length affects ride quality in various ways. A bike with shorter chainstays is lighter in weight. Also, it has quicker handling and better traction. On the other hand, bikes with longer chainstays have better stability and bigger tires allowance.

What are chainstays on a bike?

The chainstay or “stays” = The pair of frame tubes that joins the bottom bracket shell to the rear axle holders (the slots the back wheel goes in). This means that the chain stays connect the bottom bracket (BB) to the center of the back wheel.

How is top tube length measured?

Top Tube Length

Actual (Center-Center): Measured along the length of the top tube from the center of the seat tube to the center of the head tube. ...
Effective (HT Top): The length of an “imaginary” level tube extending from the center of the seat tube axis to the top of the head tube.

Is chainstay necessary?

There is a need for a Chainstay protector to protect the bike from scratch, dents, and other such things. If you want to keep your pride and joy looking pristine without any scratches and dents, then you must apply a Chainstay and frame protectors.

How do you calculate chain links?

Procedure

Calculate C, where C = CD/p.
Calculate A, where A = Z1 + Z2.
Calculate S, where S = Z2 – Z1.
Refer to the adjacent table to find the T value for the calculated S value.
Chain Length in Pitches, CL = 2C + (A/2) + (T/C)

What is a BMX chain stay?

What is the Chain Stay? The chain stay is the part of the bike that holds your back wheel. It runs from the back wheel all the way to the bottom bracket and seat tube. The length of the chain stay determines how close or how far your rear wheel is from you.

What is bottom bracket height?

Bottom Bracket Height is a measurement taken vertically from the ground up to the center of the bottom bracket. This measurement will vary depending on the tire used on the bike.

What is BMX chainstay?

Chainstay length is the distance from the center of the bottom bracket to the center of the rear axle. This length is important to consider when choosing a frame because it changes the way your bike will react in different situations. The standard chainstay length on BMX bikes is between 12.8-14 inches.

Do road bikes need a chainstay protector?

Obviously on a road bike, the chainstay getting slapped by the chain pretty much never happens. That's why road bikes don't need them. It doesn't matter if mud gets on the chainstay, just clean it afterwards.

Do road bikes need chain guards?

It is not necessary to install a chain guard on your bike. In saying that if you are commuting to work it could be useful to have a chain guard in to protect your trousers and shoelaces from getting caught on the chain or the gears.

What is the use of chain stay protector?

NICEDACK Chainstay Protector preserve your bike's resale value. The removable ones help capture some of the grease and grime, making cleanup easier.

What does a 26 inch bike mean?

And what does it mean when they say “26 inches”? A 26 inch mountain bike means that the wheels have an internal diameter of 26 inches. This measurement is commonly used in reference to mountain bike. For example, a man who stands 5'8″ would be best suited for a 26-inch frame.

Why is a shorter chainstay better?

Shorter chainstays effectively reduce the wheelbase of the bicycle. The result is a nimbler, more maneuverable machine offering faster cornering – a good quality when the trails are extra “twisty”. The improvement comes at a price – reduced stability and potential lifting of the front wheel during climbing.

What is stack height bike?

Stack is the vertical height between the bottom bracket centre and the top of the centre of the head tube.

What is chainstay MTB?

The chainstay sits between the bottom bracket shell and the rear dropout. It is the part of the frame which runs parallel to the top of the chain. The chainstay on the opposite side of the bike to the chain is also called a chainstay, despite the fact that the chain is not on that side of the bike.

What is standover height BMX?

What is Standover Height? The approximate distance from the ground to the top of the top tube, typically around the point where one would stand over the bike when mounting or dismounting.

What is a bike dropout?

A fork end, fork-end, or forkend is a slot in a bicycle frame or bicycle fork where the axle of a bicycle wheel is attached. A dropout is a type of fork end that allows the rear wheel to be removed without first derailing the chain.