What is the 215 on tire size?

215: The first number designates the tire's width, from sidewall to sidewall. In this case, the number 215 means that the tire width is 215 millimetres. 65: The number after the dash specifies the tire's aspect ratio, which is the ratio of the tire's width to its height.

What does the 215 stand for in tire size?

“215” in this sequence refers to the tire's width in millimeters. In other words, this tire is 215 millimeters wide, from sidewall to sidewall.

What tire is taller a 215 or 225?

It's usually determined by dividing the section height of the tire by the section width. The 215 will likely have a higher aspect ratio than the 225 due to differences in their widths. This slight change in the ratio will affect the tire's performance on the road.

What are 215 tires in inches?

The first number, 215, is the width of the tire between the widest points of its inner and outer sidewalls. This is expressed in millimeters. So your tire is 215 millimeters wide, or 8.471 inches wide. The second number in your tire size, 75, is the aspect ratio or section height.

What is the meaning of 215 60 r16?

This number indicates that your tire has a width of 215 millimeters. 60. This number means that your tire has an aspect ratio of 60%. In other words, your tire's sidewall height (from the edge of the rim to the tire's tread) is 60% of the width. In this case, the sidewall height works out to be 129 millimeters.

35 related questions found

What is the meaning of 215 65 r16?

P - Passenger vehicle tire. 215 - This number specifies the width in millimeters (i.e. 215 mm) 65 - This number is the Aspect Ratio, the ratio of sidewall height to width. R - Radial. 16 - This number designates the tire's diameter in inches (i.e. 16")

Can I use 215 65R16 instead 215 60R16?

Registered. I wouldn't do it, if only because of the load capacity rating difference. The P215/65R16 has a load capacity rating of 96, whereas the P215/60R16 has a load capacity rating of 94. Stay safe with tires.

How much taller is a 215 than a 205?

The diameter of the 205 is 26.3 inches and for the 215 the diameter is 26.7 inches. That is 0.4 inches of difference meaning that it would raise the height of the trailer by 0.2 inches.

Can I use 215 50r17 instead of 225 50r17?

Banned. It will be fine not much of a different at all. It will throw your speedometer off a little.

Can I use 235 tires instead of 215?

215 and 235 tires are interchangeable if they come with the same tire aspect ratio and the same rim diameter.

Can I use 225 55r17 instead of 225 50r17?

Maybe. The tire size is fine. The wheel (the metal part) is what you need to make sure that it fits on your existing car.

Can I use 60 instead of 65 tires?

Physically, yes they will fit. It is recommended to stay within 3% of the original tire size on the car though. The size you have is 3.09% smaller, so not recommended.

Can I use 70 instead of 65 tires?

Both 65 and 70 series tires can be categorized as all-season passenger tires, which generally have aspect ratios between 65 and 80, but a series 65 tire will give better response while a series 70 tire will offer a better, more comfortable ride.

Can I use 215 tires instead of 205?

Both 205 and 215 will work OK esp for 16" to 18" wheels. You'll get a lighter tire and slightly less rolling resistance with the 205- overall a good street tire that can wear well but that depends on the softness of the rubber compound.

Will a 215 tire fit a 8 inch rim?

Re: 215 tire on an 8" rim

thats what i run, its a little stretched, but its still within acceptable range. Most 215/40-17 tires have an approved range of rim widths of 7.0-8.5 inches. A 17x8 rim is in that range - heck, it's even in the middle of the range! Just do it, no worries there.

Will a 215 tire fit a 9 inch rim?

yes they will, i run 215/45/17 on a 255mm wide or 10" wide rim.

Can you fit a 215 tire on a 6 inch rim?

Anything larger than 215 on 6" rims are NOT recommended. In fact you are risking your safety.

Are 215 tires bigger than 205?

With the information we have now, we know that the main difference between a 205 tire and a 215 tire is in width, which is 10 mm more on the 215.

What's the difference between a 205 and a 215 tire size?

The difference between 205 and 215 is 10mm. It'll give you a little more of a contact patch which will improve traction. If you're worrying about scrubbing Mike, just roll your fenders and you should be alright.

Will a 215 tire fit a 7 inch rim?

Re: will a 215 tire fit a 7inch wide rim? (

Yes, in fact it's probably the ideal rim width for a 215.

Will 225 60R16 fit 215 60R16?

They'll work fine. The difference between a 215/60 and a 225/60 isn't enough to cause any problems. Your speedo will read a little fast but maybe that'll help keep you from getting speeding tickets. Actually, going from a 225/60R16 to a 215/60R16 is a change in both diameter and sidewall.

Can I put 225 60R16 instead of 225 65r16?

Can I put 225/60/R16 tires on my town and country van instead of 225/65/R16. As long as you replace all 4 that should be fine. The ride will suffer slightly as you will lose some sidewall.

What does r16 mean on tires?

This is indicated in percentage of the tire width. “R” stands for the construction method of the tire indicating the tire is a radial tire. The following two numbers (16) indicate the diameter of the wheel rim in inches. The next two or three numbers (94) indicate the load index of the tire.

You Might Also Like